Skip to content

1.04 VAV

For supply.

  • Available in size 100, 125, 160, 200, 250, 315 and 355
  • Large control range, without loss of comfort or risk of cold.
  • Suitable for (very) cold primary air (from 10 °C)
  • Electronic control components for various applications (Easy, Compact, Universal and LABCONTROL)
  • Standard equipped with FloXact™ air speed sensor with 2% accuracy

Versions:

  • VIN

Application

VAV units are used in air conditioning and ventilation systems to improve comfort and reduce energy consumption. The VAV unit is controlled by a thermostat or DDC controller and varies the air quantity based on cooling and/or ventilation needs. This results in considerable savings in fan energy because, with little or no cooling demand, the valve can be partially or even completely closed. The VAV unit can also be used for air quality control. Depending on the CO2 concentration, more or less fresh air is then supplied. The units are available in single and double-walled versions.

Specifications

Unit

  • Housing; galvanized steel (275 g/m²), airtight according to class “B” NEN-EN-1507 and NEN-EN-12237. Class C available on request.
  • valve blade; sandwich construction, 1.5mm SBR sheet rubber with insert between 2 galvanized steel blades.
  • bearings; NYLON (PP6.6), maintenance-free
  • valve shaft; Aluminum ø12 mm
  • Operating temperature +5°C to +50°C
  • Storage temperature –5°C to +70°C

FLOXACT™ AIR SPEED SENSOR

  • Accurate measurement from 1.0m/s air speed
  • Deviation +/-2% at 3xD straight approach (+/-10% at 1xD straight approach).
  • Average measurement over 8 to 24 measuring points according to Log-Tchebycheff method.
  • Amplification of measurement signal with at least 2.5x.
  • Extruded aluminum measuring profile.
  • Rounded measuring openings make the FloXact™ insensitive to skewed or turbulent flow up to 30º in all directions relative to the profile axis.

Control (optional)

  • Analog controller Belimo LMV-D3-MP (24VAC, 0(2)-10V input and output, 5Nm).
  • BACnet controller KMC BAC-800x and BAC900x.
  • Mounting of control equipment supplied free of charge (PRIVA, Honeywell, Siemens, etc.) possible in consultation.
  • All control equipment is fitted as standard on the right side (seen with the air direction) of the unit, unless stated otherwise when ordering.

Questions about this product?

Do you have a question about this product? Please contact us using the form or call:

De Compagnie 22E
1689 AG ZWAAG

Name
Privacy(Required)